Hitachi - Foundry Master Smart 2

Benchtop Spark OES

Hitachi - Foundry Master Smart 2

The FOUNDRY-MASTER Smart 2 alloy analysis spectrometer is the ideal solution, offering German quality at the most competitive price on the market.

Laboratory-grade accuracy in a compact design: Combining a CMOS sensor with a highly stable spark source supports consistent and repeatable results for critical elements such as carbon and nitrogen.
Robust construction for industrial environments: The sturdy casing is suitable for harsh working conditions; its compact size allows for convenient placement in busy laboratories or production areas.
Stable operation, reduced recalibration effort: Designed for routine QA/QC processes, with low maintenance requirements and minimal recalibration needs as described by the manufacturer.
SpArcfire software is intuitive: Its modern interface meets the needs of metallurgical professionals while remaining accessible to less experienced operators.
Fast metal grade identification: The GRADE database is pre-installed to support grade matching and identification. The brochure lists over 15 million records, across 420,000 materials, covering 82 national and international standards.
Data management and result retrieval: ExTOPE Connect supports storing, sharing, accessing results in real time, and managing multiple devices at multiple locations from a central location.
Expandable to meet application requirements: The matrix/elements are expandable; the company also offers Grade Search Plus options, material calibration software, and a laptop.
Application-specific support: The brochure outlines expert support and customized calibration to meet the technical requirements of each application.

The FOUNDRY-MASTER Smart 2 is suitable for incoming material inspection, molten metal quality control, and metal analysis processes in manufacturing.

Foundry for ferrous and non-ferrous metals.
Quality control and assurance (QA/QC) in manufacturing.
Analysis of base metals and alloys: Fe, Al, Cu, Ni, Ti, Mg, Co, Sn, Zn, and Pb.
Inspect cast iron, bronze, brass, Cu-Ni alloys, and alloys such as Hastelloy, Inconel, and Monel.
Electronics: Analysis of lead-free solder alloys.
Pressure die casting and lightweight alloy production.
Batch control and final inspection in the metal QA/QC chain.

Overview
Size	280 x 415 x 665 mm (HxWxD)
Power source	90-250 VAC (50/60 Hz)
Mass	35 kg
Average power consumption	Main unit 700W
Standby power consumption	50W (Power supply capacity 100W)
Argon gas
Purity	≥5.0
Inlet pressure	3 Bar
Optical system
Optical system	According to the Paschen-Runge Mounting principle
Optical system	The light beam travels directly to the optical chamber.
Analytical wavelength range	175 – 420nm (extending to 671nm for Cu, Na, Li)
Sensor	Multi-CCD sensor (2048 pixels per chip) with optimized pixel resolution.
CCD resolution	7 pico-meter
Contrast	1.75 nm/m (1st order)
Focal	300 mm
Holographic grating	1774 grooves/mm
Plasma generator	High-energy electrical discharge machining (HEPS) technology helps to burn samples more effectively.
	Set the parameters using the software.
	Frequency: 80 – 500 Hz
	Voltage: 250-500 V
Sample holder set	The specimen holder features a three-dimensional open design, allowing it to accommodate specimens of various sizes.
	Jet-Stream-electrode technology is suitable for small and complex specimens. It optimizes argon consumption to the lowest possible level.
	Multi-adjustable specimen holder
	The lid may vary depending on the specific model.
Analytical limits of some principal elements	C: 30ppm; Si: 20ppm; P: 20ppm; S:20ppm; Mn:20ppm

SpArcfire: Phần mềm vận hành với giao diện hiện đại, hỗ trợ phân tích và diễn giải kết quả.
GRADE Database: Cơ sở dữ liệu kim loại được cài đặt sẵn để nhận dạng mác nhanh; có thể cập nhật cơ sở dữ liệu bằng một số thao tác trên thiết bị.
ExTOPE Connect: Dịch vụ quản lý và lưu trữ dữ liệu, hỗ trợ chia sẻ kết quả, truy cập theo thời gian thực và quản lý đội thiết bị tại nhiều cơ sở.

Overview
Size	280 x 415 x 665 mm (HxWxD)
Power source	90-250 VAC (50/60 Hz)
Mass	35 kg
Average power consumption	Main unit 700W
Standby power consumption	50W (Power supply capacity 100W)
Argon gas
Purity	≥5.0
Inlet pressure	3 Bar
Optical system
Optical system	According to the Paschen-Runge Mounting principle
Optical system	The light beam travels directly to the optical chamber.
Analytical wavelength range	175 – 420nm (extending to 671nm for Cu, Na, Li)
Sensor	Multi-CCD sensor (2048 pixels per chip) with optimized pixel resolution.
CCD resolution	7 pico-meter
Contrast	1.75 nm/m (1st order)
Focal	300 mm
Holographic grating	1774 grooves/mm
Plasma generator	High-energy electrical discharge machining (HEPS) technology helps to burn samples more effectively.
	Set the parameters using the software.
	Frequency: 80 – 500 Hz
	Voltage: 250-500 V
Sample holder set	The specimen holder features a three-dimensional open design, allowing it to accommodate specimens of various sizes.
	Jet-Stream-electrode technology is suitable for small and complex specimens. It optimizes argon consumption to the lowest possible level.
	Multi-adjustable specimen holder
	The lid may vary depending on the specific model.
Analytical limits of some principal elements	C: 30ppm; Si: 20ppm; P: 20ppm; S:20ppm; Mn:20ppm

SpArcfire: Phần mềm vận hành với giao diện hiện đại, hỗ trợ phân tích và diễn giải kết quả.
GRADE Database: Cơ sở dữ liệu kim loại được cài đặt sẵn để nhận dạng mác nhanh; có thể cập nhật cơ sở dữ liệu bằng một số thao tác trên thiết bị.
ExTOPE Connect: Dịch vụ quản lý và lưu trữ dữ liệu, hỗ trợ chia sẻ kết quả, truy cập theo thời gian thực và quản lý đội thiết bị tại nhiều cơ sở.