Share your requirements so Quoc Huy can recommend a suitable approach.
Pressure calibration device with two low and high ranges up to 700 bar. Convenient for working on construction sites as well as inspection rooms,
| 1. PRESSURE MEASUREMENT | ||
| Measurement range | 1,3, 10 & 30 bar | vacuum to1, 3, 10 & 30 bar |
| 100, 300, & 700 bar | 0 to 100, 300 & 700 bar | |
| Accuracy - | 0 to 30% of Range: | ±(0.01% of Full Scale) |
| bar (Gauge Pressure) | 30 to 110% of Range: | ±(0.035% of Reading) |
| Vacuum* : | ±(0.05% of Full Scale**) | |
| Units | User selectable | bar, mbar, kPa, MPa, psi, inH20, inHg, mmHg, mmH20, kg/cm2 |
| 2. CURRENT & VOLTAGE MEASUREMENT | ||
| Current (mA) Input | Accuracy: | ±(0.015% of rdg + 0.002 mA) |
| mA Range: | 0 to 55 mA | |
| Resolution: | 0.001 mA or 0.01% | |
| Units: | mA and % | |
| Current (mA) Output | Accuracy: | ± (0.015 of rdg + 0.002 mA) |
| Range: | 0 to 55 mA* | |
| Voltage (VDC) Input | Accuracy: | ±(0.015 % of rdg + 2 mV) |
| Range: | 0 to 28 VDC | |
| Resolution: | 0.001 VDC | |
| Switch Test | Switch Type: | Dry Contact |
| 3. DISPLAY | ||
| Screen: | 320 x 240 pixel graphical display | |
| Display Rate: | 3 readings/second (standard) | |
| 10 readings/second (switch test and peak hi/lo modes) | ||
| 4. ENCLOSURE | ||
| Rating: | IP66/67 | |
| 5. POWER | ||
| Battery Life: | >12 hours non-sourcing | |
| >8 hours when sourcing 12 mA | ||
| Recharge Time: | 16 hours* (Using Eneloop 2100 mA hr) | |
