Ametek - 30 series

Explosion-proof 2-channel pressure calibrator

Ametek - 30 series

Pressure calibrator with two low and high ranges up to 300 bar. High accuracy up to ± 0.05% of reading....

Pressure calibration device with two low and high ranges up to 300 bar
High accuracy up to ± 0.05% of reading
Active temperature compensation technology for pressure and current ensures accuracy in readings without being affected by environmental conditions.
Ability to measure low pressure, high pressure and even vacuum pressure
Calibration for mechanical pressure gauge, digital pressure gauge and transmitter
Display on LCD screen, 2 lines, 6 digits
Can display pressure of both ranges simultaneously or display both pressure and current
The measurement units and configuration for the 30 series models can be set with the CONFIGM30 software.
Solid design, easy to use
Explosion proof according to ATEX, CSA standards

Overview
Working pressure:	See table
Pressure measurement accuracy:
Range 0 - 110%:	±(0.05% of reading + Floor term)
Floor term:	0.005% full range or screen resolution (whichever is greater)
Vacuum range:	±(0.25% of reading + Vacuum Floor term)
Vacuum Floor term:	0.0003 bar for 1 and 2 bar ranges; 0.001 for 20 bar range
Measure current
Measuring range:	0 to 55 mA
Accuracy:	±(0.025% of reading + 0.001 mA)
Resolution:	0.001 mA
Connector:	4mm plug
Display:	LCD display, 2 lines, 6 digits 5mm high
Reading speed:	2 times/second (adjustable to 1, 3 or 3.7 times/second)
Computer connection:	micro-USB port
Pressure connector:	1/8” NPT-female
Power Supply:	1 pin 9V
Explosion proof according to standards:
Ex ATEX:	II 2G Ex ia IIC T4 FTZU 06 ATEX 0010 X
IECEx:	II 2G Ex ia IIC T4 Gb IECEx FTZU 10.0018 X