Share your requirements so Quoc Huy can recommend a suitable approach.
Pressure calibration equipment with two low and high ranges up to 1000 bar...
| Overview | ||
| 1. Pressure measurement | ||
| Scale | 3, 10 & 30 bar | -1 to 3, 10 & 30 bar |
| 100, 300, 700 & 1000 bar | 0 to 100, 300, 700 & 1000 bar | |
| Accuracy level - | 0 to 30% of Range: | ±(0.01% of Full Scale) |
| bar (Pressure gauge) | 30 to 110% of Range: | ±(0.035% of Reading) |
| Vacuum* : | ±(0.05% of Full Scale**) | |
| Unit | User optional | bar, mbar, kPa, MPa, psi, inH20, inHg, mmHg, mmH20, kg/cm2 |
| 2. Current and voltage measurement | ||
| Current (mA)- Read | Accuracy level: | ±(0.015% of rdg + 0.002 mA) |
| mA measuring range: | 0 to 55 mA | |
| Resolution: | 0.001 mA or 0.01% | |
| Unit: | mA and % | |
| Current (mA)- Output | Accuracy level: | ± (0.015 of rdg + 0.002 mA) |
| Measuring range: | 0 to 25 mA* | |
| Voltage (VDC)- Read | Accuracy level: | ±(0.015 % of rdg + 2 mV) |
| Measuring range: | 0 to 30 VDC | |
| Resolution: | 0.001 VDC | |
| Loop source | Fixed Output: | 24 VDC |
| Check the switch | Type | Dry switch |
| 3. Temperature measurement | ||
| Accuracy level: | ±(0.015% of rdg) + 0.02 Ohm | |
| Measuring range: | 0 – 400 Ohms | |
| Resolution: | 0.01 on all scales | |
| Unit: | C, K, F, R, Ω | |
| Connect: | Lemo Plug, 1S Series, 304 insert configuration | |
| 4. DISPLAY | ||
| Screen | 320 x 240 pixel | |
| Screen reading speed: | 3 times/paper (basic) | |
| 10 times/second (for switch test mode) | ||
| 5. Protection level | ||
| Qualified | IP65 | |
| 6. Source | ||
| Battery life | >12 hours in no power mode | |
| >8 hours with 12mA power supply | ||
