Standard Roughness Tester
Taylor Hobson - Talysurf i-Series
Using low noise and high resolution sensor technology, the Talysurf i-Series is the ideal solution for industries
Gọi (+84) 828 31 08 99 để được tư vấn.
Technical Description
Full measurement of surface parameters
High resolution, low noise measuring and sensing section for accurate and reliable roughness and waveform measurement
Detailed measurement parameters
Cover all roughness parameters including Rk, R&K, dominant waves, etc.
Versatile and easy to use
By using powerful control and analysis software, measuring roughness parameters and waveforms has never been easier
Specifications
| Overview | |
| System performance | |
| System noise | Rq = <8 nm (0.3 μin) |
| Horizontal performance | |
| Traverse length – X Max / Min | 60 mm / 0.1 mm (2.4 in / 0.004 in) |
| Traverse / Measuring speeds | 10 mm/s Max - 0.25 mm/s, 0.5 mm/s & 1 mm/s |
| 0.39 in/s Max - 0.01 in/s, 0.02 in/s & 0.04 in/s | |
| Minimum data sampling interval in X | 0.125 μm (5 μin) |
| Straightness accuracy (Pt) | 0.15 μm (5.9 μin) |
| Vertical performance | |
| Range | Range 1 = 1 mm (0.04 in) |
| Range 2 = 0.2 mm (0.008 in) | |
| Range 3 = 0.04 mm (0.002 in) | |
| Resolution (Z) | Range 1 = 4 nm (0.16 μin) |
| Range 2 = 0.8 nm (0.031 μin) | |
| Range 3 = 0.16 nm (0.006 μin) | |
| Range to resolution | 262,144:1 |
| Stylus arm length | 60 mm |
| Tip size | 2 μm radius conisphere diamond |
| Force | <1 mN force |
| Measuring station | |
| Instrument dimensions | See floor plan |
| Instrument weight | 223 Kg (with steel frame option) |
| Motorized vertical column | 450 mm (17.7 in) |
| Environment | |
| Storage temperature | 5 °C to 40 °C (41 ºF to 104 ºF) |
| Operating temperature | 18 °C to 22 °C (64 ºF to 72 ºF) |
| Temperature gradient | < 2 °C / hour (< 3.6 ºF / hour) |
| Operating humidity | 45 % to 75 % relative, non condensing |
| Maximum RMS | 2.5 μm/s (100 μin/s) at < 50 Hz |
| 5.0 μm/s (200 μin/s) at < 50 Hz | |
| Electrical (alternating supply, single phase with earth, 3-wire) | |
| Supply type | Alternating supply, single phase with earth (3-wire) |
| Instrument & computer voltage | 90 V - 230V |
| Frequency | 47 Hz to 63 Hz |
| Supply voltage transients – width | EN 61000-4-4 |
| Power consumption 500 VA | 500 VA |
| Safety | EN 61010-1 |
| EMC | EN 61000-6-3 |
| EN 61000-6-1 | |
