Metal Ultrasound Machine
GE - Mentor UT
Defect inspection of metallic and non-metallic materials (Composite). Inspection of flat plates and tubes with diameters from 1.5 inches
Gọi (+84) 828 31 08 99 để được tư vấn.
Technical Description
Intelligent phased array ultrasonic equipment is increasingly used for defect testing in materials and is gradually replacing the Radiography Testing (RT) method.
- Defect testing of metal and non-metal materials (Composite)
- Test flat plate and tube 1.5 inches or larger in diameter
- Using a high-resolution multi-touch color screen (Tuchscreen - Multi-Touch), suitable for many indoor and outdoor working environments
- Simultaneous display of A-Scan, B-Scan (E-Scan), C-Scan, C-Scan Overview and measurement values
- Compatible with probe types for specific applications
- Using both Phased Array and Conventional probes simultaneously in the same application
- Simultaneous display of 15 analytical readings for applications
- Scan mode 1 PA probe or 2 parallel probes
- Software upgrades automatically updated and free
- The test applications are set up and downloaded for free on the company's website.
We currently offer two models 32:32PR & 32:128PR
Applications
- Defect inspection of metallic and non-metallic materials (Composite)
- Check weld defects of flat and tubular parts
- Measure and map corrosion
- Check the quality of bolt threads
- Check welding defects on railway tracks, machine shafts, flanges
Specifications
| Overview | |
| Machine size: | 295 mm x 230 mm x 60 mm |
| Weight: | 2.9kg |
| Screen size: | 264 mm (10.4") |
| Resolution: | 1024 x 768 pixels |
| Viewpoint: | ±85° in all directions |
| Storage: | 16GB internal memory and via USB 2.0 port |
| Data: | Connect and share data over local area networks, the Internet and Wi-Fi |
| Communication: | USB, Ethernet, WiFi |
| Export report format: | JPG, PDF, CSV |
| Integrated digital X, Y axis encoder on display | |
| Power Supply: | 100 to 240 VAC, 47–63 Hz, 1.9 A; 12VDC |
| Battery operating time: | 3 hours, 9 hours with extended battery (hot swappable while in operation) |
| Working temperature: | -20°C to 55°C |
| Protection level: | IP65 |
| Meets standards: | MIL-STD-810G Method 501.5 & 502.5, Procedure I, II and V |
| File data: | 3.5 GB (file data for 1 scan) |
| Number of active variables: | 32 |
| Beam aperture: | 1-32 (1-128 with MUX Module) |
| Maximum number of variables: | 32 (128 with MUX Module) |
| Law of Convergence: | 1024 |
| Scan mode: | Linear, Sector, focused |
| Pulse shape: | Bipolar Square Wave |
| Voltage: | 20–150 in 5 V steps |
| Pulse Width: | (auto or manual) 50–3000 nS |
| Delay: | 10 nS increments |
| Amplification: | 0–78 dB in 0.2 dB steps |
| TCG Number: | 16 points |
| Slope 50 dB/μS | |
| Pulse shape: | full, upper half pulse, lower half pulse, RF |
| Frequency range: | 0.5 MHz to 15 MHz |
| Frequency of establishment: | PRF 10 Hz to 20,000Hz |
| Sampling rate: | 62.5 MHz, up-sampled to 500 MHz |
| Step Delay: | 2.5 nS |
| Data reception speed: | 50 nS to 150 μS |
| Ascan Pixels: | 128, 256, 512, 1024, 2048, 4096 |
| Filter: | 1, 2, 4, 5, 7.5, 10 MHz, and Broad Band |
| Review Portal: | A, B and IF |
| Rating Type: | J–Flank, Zero Before, Zero After, Peak |
| Vertical gain: | 800% FSH |
| Resolution: | 0.05 mm (0.002") |
| Remote setting function: | IWC |
| MUX MODULE SPECIFICATIONS (Upgrade device to 32:128PR configuration) | |
| Use 2 probes 16el, 32el or 64el at the same time | |
| Size: | 218 x 213 x 104 mm (8.6 x 8.4 x 4.1 inch) |
| Weight: | Weight: 3 kg (6.5 lbs) |
| Power supply: | |
| Rechargeable battery: | Rechargeable battery: 84 WH Lithium Ion (Usage time: 6 hours and can be hot-swappable while in operation) |
| Charging source: | Charging source: 100 to 240 VAC, 47–63 Hz, 1.9 A; 12VDC |
| Configuration: | |
| Phased Array: | |
| Channels : | 32:128 PR (supports 32:32, 32:64 and 32:128 combinations) |
| Beam aperture (Aperture): | 1-32 |
| Focal Laws: | 1024 |
| Scan mode: | Linear, Sector, focused |
| Conventional: | 1 Traditional UT (dual) pulse Echo TR (Transmit/ Receive) channel (used for conventional probes and TOFD) |
