Engine testing equipment

• Diagnosis is based on the parameters of coil resistance R, coil impedance (Z), phase angle Fi (φ), I/F ratio.
• Detect short circuits in turns and coils
• Detects coil contamination due to grease, dust or liquid.
• Quick check of rotor quality.
• Detect poor contact errors such as broken or burned connections, contact oxidation or loose wires
• Phase imbalance: impedance imbalance = reduced motor life and higher power consumption
• Earth fault detection (test voltage 500V or 1000V)
• Power supply: rechargeable battery (in the machine)/ Battery charger: 230VAC, 50Hz

Error diagnosis.

• Know within minutes whether the fault is in the connecting cable, electrical or mechanical fault, coil fault,
  internal fault or casing contact.

Test and run.

• Make sure the motor, power cord and connections are ready for test run.

Quality control.

• Test new and old spare engines.
• Inspect the motor after repair for abnormalities or repair errors such as incorrect wire diameter or incorrect wiring diagram.