
Wireless Inclinometer
Taylor Hobson - Talyvel 6
Talyvel 6 is an electronic inclinometer that provides flexible and accurate angle, level, flatness and straightness measurements.
Technical Description
- Applications of this device include measuring the straightness of guide rails in machine tools, the flatness of a map table or the absolute level of a structural member. The Talyvel 6 also has a function to compare the difference between the preset level and the measured level.
- Optional level difference measurement comparison function
- Wireless connectivity option with range up to 10 m
- Pendulum-based transmitter with high stability and fast adjustment of gravitational acceleration or absolute level
- High resolution and accuracy up to 0.2 seconds
- Reading units in arc seconds or gradient
Applications
Civil Engineering
• Remote monitoring of construction inclination
• Checking the displacement of bridge arches before and after construction
• Checking foundation settlement and balancing the foundation base
• Leveling the foundation for radar systems, gyro platforms, weapons or large telescopes
• Checking the flatness and alignment of the rails
Industrial machine tools
• Check the straightness and torsion of the slide
• Check the perpendicularity of the column to the slide
• Measure the flatness of the flat table
• Monitor the settlement of large machinery
• Measure the curvature of the rolls
• Check and establish parallelism
Marine Engineering
• Check the torsion of the marine engine base
• Position the weapon aperture in sync with the reference platform (differential mode)
• Check the parallelism of the crank pin with the main bearing on the marine crankshaft
Specifications
Measurability
Standard options | Wide range options | |
Scope | ± 800 seconds | ± 2000 seconds |
Highest accuracy | 0.2 seconds | 0.4 seconds |
Accuracy within 100 seconds center | ± 1 second | ± 2 seconds |
Full range accuracy | ± 8 seconds | ± 20 seconds |
Resolution | 0.01 seconds | 0.1 seconds |
Analog software display | Range ±600 seconds, switchable to "FINE" range (±10 seconds) | |
Response time | Display stabilization time: 2 seconds | |
Talyvel® Battery Life | Not less than 10 hours of continuous use when fully charged | |
Operating temperature | -5°C to +40°C | |
Storage temperature (Device without battery) | -10°C to +40°C | |
Standard USB cable length | 3 meters (9.8 feet) | |
Power supply via PC port | 110V, 120V, 220V, 240V, 50/60Hz |