Taylor Hobson - Talyrond 595H Range
Roundness Analysis Equipment
Taylor Hobson - Talyrond 595H Range

Roundness, Roughness, and Contour Analyzer

Taylor Hobson - Talyrond 595H Range

Equipped with ultra-precision stepper motors on all operating axes and an active anti-vibration mount, the Talyrond 595H...

Technical Description

  • Application to measure roundness parameters of mechanical parts such as bearings, cylinders, crankshafts, computer hard drives, fuel injectors, lathe or grinding parts...
  • Measures roundness parameters such as: roundness, parallelism, cylindricality, straightness, flatness, coaxiality, concentricity, eccentricity, radial runout, perpendicularity, discontinuous measurement, analysis of uneven planes, thickness variation
  • The rotating disc has the ability to automatically center and level flat.
  • Specially designed and precision lever arm with automatic vertical/horizontal rotation and angle setting (Talyrond 585/ 595)
  • Column height: 300mm/ 500mm/ 900mm
  • Sample diameter: max Ø400mm (can be up to Ø485mm); Measuring diameter: max Ø350mm
  • Air bearing rotating shaft operates frictionlessly, high precision
  • The stand is equipped with an active anti-vibration system with very high sensitivity (Talyrond 595)
  • The column and base are designed to be sturdy, ensuring that the operating system is not affected by the mass and displacement of the specimen.
  • Ultra software is simple to use, giving fast and accurate results.

Specifications

Measurement capability
Column axis300 mm column500 mm column
Straightness over column length0.2 µm / 300 mm (8 µin / 11.8 in) 0.2 µm / 500 mm (8 µin / 19.7 in)
Straightness over any 100mm (3.94in)0.12 µm / 100 mm (4.7 µin / 3.94 in)0.15 µm / 100 mm (5.9 µin / 3.94 in)
Vertical axis to spindle axis parallelism0.5 µm / 300 mm (20 µin / 11.8 in)0.5 µm / 500 mm (20 µin / 19.7 in)
Length measurement (0.03 µm/mm + 1.5 µm)
Column noise †<2 0 nm Rq
Spindle axis
Radial limit of error± 0.008 µm (1-15 upr) or ± 0.01 µm (1-50 upr)
Axial limit of error± 0.01 µm (1-15 upr) or ± 0.015 µm (1-50 upr)
Coning Error (height above table)± 0.00025 µm/mm
Coning Error (radius from centre)± 0.00025 µm/mm
Horizontal arm axisRadial straightness unit
Straightness over full length of travel0.2 µm / 200 mm (4 µin / 7.9 in)
Straightness over any length of travel0.125 µm + 0.000375 µm/mm (5 µin + 0.015 µin/in)
Squareness to spindle axis1 µm / 200 mm (39.4 µin / 7.9 in)
Radial measurement *(0.1 µm/mm + 1.5 µm)
Arm noise †<20 nm Rq
GaugeRange/resolution
High range± 2 mm , 0.016 µm resolution (0.078 in range, 0.6 µin resolution)
Normal range+/- 1 mm range, 0.008 µm resolution (0.039 in range, 0.3 µin resolution)
Mid range+/- 0.2 mm range, 0.0016 µm resolution (0.0078 in range, 0.06 µin resolution)
Low range+/- 0.04 mm range, 0.0003 µm resolution (0.003 in range, 0.012 µin resolution)
 
Component capacity
Measuring capacity300 mm column500 mm column
Maximum component height300 mm (11.82 in)500 mm (19.7 in)
Maximum component diameterØ 400 mm (15.7 in)
Maximum measuring depth155 mm (6.1 in)
Maximum measuring diameterØ 350 mm (13.8 in)
Maximum component weightAuto Center and Level: 40 kg (88 lb)
Maximum worktable moment loadingAuto C&L: 1250 kg/mm (108 lb/in) within a central 80 mm (3.15 in) equilateral triangle
 
Technical
Column axis300 mm column500 mm column
Column constructionPrecision machined cast iron datum
Movement range300 mm (11.8 in)500 mm (19.7 in)
Speed of traverse moving: 0.1 - 105 mm/s (0.04 - 4.1 in/s) stepped
measuring: 0.1 - 20 mm/s (0.01 - 0.8 in/s) stepped
contacting: 0.5 - 5 mm/s (0.02 - 0.2 in/s) stepped
Positional control4 µm (160 µin)
Positional resolution0.25 µm (0.98 µin)
Number of data points (selectable)200,000 maximum
Horizontal arm axis
Arm constructionLapped ceramic datum
Movement range200 mm (7.9 in)
Speed of traversemoving: 0.25 - 15 mm/s (0.01 - 0.6 in/s) stepped
measuring: 0.25 - 15 mm/s (0.01 - 0.6 in/s) stepped
contacting: 0.5 - 5 mm/s (0.02 - 0.2 in/s) stepped
Over-center travel25 mm (0.98 in)
Positional control+/- 5 µm (200 µin)
Positional resolution0.25 µm (10 µin)
Minimum movement0.05 mm (0.002 in)
Number of data points (selectable)200,000 maximum

Related Products

Taylor Hobson - Talyrond 585H Range

Automatic roundness, roughness, contour analyzer

Taylor Hobson - Talyrond 585H Range

Taylor Hobson - Talyrond 565H Range

Roundness, Roughness, and Contour Analyzer

Taylor Hobson - Talyrond 565H Range

Taylor Hobson - Talyrond 400H Range

Precision Roundness Analyzer

Taylor Hobson - Talyrond 400H Range

Taylor Hobson - TalyMaster

Multi-sample Simultaneous Roundness Analyzer

Taylor Hobson - TalyMaster

Are you interested in our products?
Need a quote for a product or equipment?

Please contact our team of experts for free and professional advice