
Motorized 3-Axis Probe Head for CMM
Renishaw - PH10T
The PH10T Plus uses all M8 threaded probes, such as TP20 and TP200, and the extension rods fit directly into the connector.
Gọi (+84) 828 31 08 99 để được tư vấn.
Technical Description
The PH10T PLUS probe is similar in construction to the PH10M, except that it has an M8 threaded probe holder instead of an automatic holder.
The PH10T Plus uses all M8 threaded probes, such as TP20 and TP200, and the extension rods fit directly into the connector; fully compatible with all Renishaw module change systems and styli (measurement needles). It operates under manual or program control, turning the 3-axis CMM into a 5-axis machine.
Specifications
A-5863-500
Length: | 103 mm |
Width: | 62 mm |
Weight: | 645 g |
Probe attachment: | M8 thread (2 wires) |
Attach head and tail: | suitable for CMM |
Suitable controller: | PHC10-3 Plus |
Position repeatability: | 0.4 µm (0.00002 in) is specified at 100 mm distance |
Total positions: | 720 |
Recommended maximum drive torque: | 0,45 Nm |
Maximum extension bar: | 300 mm (11.8 in) using PEL4 extension. |