Share your requirements so Quoc Huy can recommend a suitable approach.
PH10M is equipped with AM1 regulator module and SP25M probe
The PH10M is a versatile motorised indexing head combining Renishaw autojoint with multi-wire capability. This allows the PH10M head to accommodate long extension rods and sophisticated multi-wire probes such as the SP25M and TP7M. There are 720 repeatable positions, set in 7.5° increments to provide probe guidance.
Highly repeatable automatic coupling allows quick change of probe or extension rod without re-exchange
professional level
The AM1 and AM2 adjustment modules allow for calibration of the probe alignment with the machine and are installed between the probe and the body/tube of the machine.
PH10M
| Horizontal direction: | ±180º (7.5º increments, 48 positions) |
| Vertical direction: | 0~105º (7.5º increments, 15 positions) |
| The probe can be mounted on: | MTP2000, TP7M, TP200, TP20, TP2-5W, QVP, SP25, SP600XE, MPP-10 |
| Some combinations do not work on the same system. | |
| Extend: | PEM1, PEM2, PEM3, PAA1, PAA2, PAA3 |
| More than 1 connecting bar cannot be used. However, PAA+PFCF1, PAA1+PFCF2, and PAA1+PFCF3 can be used. | |
| It is not allowed to use connecting rods on WIZprobe/LC50/LC100/QVP. | |
| Apply: | CNC Coordinate Measuring Machine |
