Measuring Equipment

This line of magnetic particle testers helps you test and measure the performance of magnetic tables, electromagnetic current generators, or other magnetizing devices during routine system performance testing.

FSM-2
Magnetic Field Strength Meter

The FSM-2 is used to measure tangential magnetic field strength in DC and AC magnetic fields. A tangential magnetic field probe is attached to the surface of the material during magnetization, and a Hall sensor measures the voltage change produced by the magnetic field. This device measures the true RMS value of asymmetric magnetic fields. The FSM-2 is sold as a kit with the FSM-2 reference block

Note : The Digital Hall Effect Gaussmeter has been discontinued and replaced by the FSM-2.

Benefits & Features

• Equipped with RS 232 interface and backlit display.
• When the lid is closed, the case meets IP65 protection standards.
• Supplied with power supply and tangential magnetic probe.

QB2-Plus
Quick Break Tester

The QB2-Plus provides quantitative verification of the Quick-Trim function and measures the firing time from the magnetic field. The QB2-Plus can test the proper function of AC, HWDC and FWDC devices, as well as the Quick-Trim function on 3-phase FWDC devices. The firing time and Quick-Trim voltage are displayed alternately on the LCD after each reading.

Note : QB1 and QB-2 have been discontinued and replaced by QB2-Plus.

Benefits & Features

• Measure firing time and Quick Interrupt simultaneously
• Can be used with coils and wire diameters over 25 in (64 cm)
• Quantitative results provide accurate verification of the device
• Standards: ASTM E709, ASTM E1444, ISO 9934, ASTM E3024

Shunt Ammeter Kit
The Shunt Ammeter Kit is used to test the magnetizing current output of magnetic particle testers up to 10,000 amps on HWDC, 1-phase FWDC and 3-phase FWDC lines, and up to 6,000 amps on AC lines.

Use the Calibration Shunt Ammeter as part of routine system performance checks to ensure instrument accuracy and repeatability, in compliance with ASTM E709, ASTM E1444, and ASME BPVC standards. When the calibration shunt is connected to the output of the magnetic particle device, the digital ammeter provides a traceable reference standard for calibration and verification of the magnetizing device.

Benefits & Features

• Measure AC current up to 6,000 amps
• Measure HWDC, FWDC 1 phase and FWDC 3 phase currents up to 10,000 amps
• Includes calibration shunt and connection cable
• Accuracy DC +/-2% or 30 A, AC +/-3% or 30 A
• Portable storage box
• Standards: ASME BPVC, ASTM E709, ASTM E1444, ASTM E3024, ISO 9934, NADCAP AC7114/2