
Regulatory device
Magnaflux-Equipment Adapters
Used for Magnetic Particle Inspection
Gọi (+84) 828 31 08 99 để được tư vấn.
Technical Description
Make sure your Magnaflux magnetic test bench can handle whatever parts you need to inspect with this line of adjusters. From large, heavy parts to small details like bolts, screws, and fasteners, Magnaflux adjusters help you get the most out of your magnetic test bench, by supporting work with a wide variety of parts.
Specifications
Product Name | Describe |
---|---|
Central conduction | 15.875 in / 40 cm long solid copper rod for head shot magnetization of rings and hollow parts. Three diameters: 0.50 in / 12.7 mm, 0.75 in / 19.0 mm, 1.00 in / 25.4 mm |
Bearing | Used to support and stabilize long or heavy parts such as crankshafts during inspection. |
Contact block | Allows remote inspection of parts that are too heavy or too large to handle on the equipment. When clamped between the front and rear axles, this block supplies magnetizing current to the remote latches or clamps via a flexible cable (cable not included, see cable and connector section). |
Adjustment device for small parts | Allows the use of standard wet type horizontal test units for testing small parts such as bolts, screws, pins, etc. Mounted directly to the main shaft (PN 28470) or tail shaft (PN 28471), solid brass adjustment devices maintain the proper distance for precise clamping action. |
Flat Magnetic Coil | For non-contact magnetic particle inspection of small parts such as bolts and ring-shaped components. Can be used with any magnetic particle inspection device or power supply for quick, easy processing of multiple small parts at once. |