Name: Kowotest - KOWOPRO K series
Rating: 4.7 (163 reviews)

This processing system is designed for simple, manual development of NDT (non-destructive testing) X-ray films.
The entire system is made of durable gray PVC and comprises four tanks. Three small tanks for developing, interim rinsing, and fixing sit inside a jacket tank, allowing them to be heated or cooled. The large tank on the right is used for the final rinse of fixed films or for cleaning film racks and equipment after processing.
All tanks can be covered, even with film racks hanging inside. The developer and fixer tanks can also be removed from the system.
Filling and draining the water tanks and jacket tank, both equipped with overflow protection, is handled by three separate valves. The jacket-tank valve adjusts cold-water flow to cool the developer and fixer solutions.
The microprocessor controller regulates temperature and monitors the minimum water level in the jacket tank. It can also be used as a darkroom countdown timer (Count-Down Timer).
The system requires power, water, and drainage connections to operate.

Housing:	PVC, gray, 7 mm thick
Water valves:	Jacket tank, interim rinse, and final rinse
Darkroom timer 0:	60 phút (cài đặt sẵn 5 phút)
Temperature:	15°C … 25°C, adjustable
Heating power:	1.000 W – (K41- 2.000 W)
Electrical connection 220 … :	240 V / 50 … 60 Hz / 10 A, cable length 3 m
Water connection:	G3/4 in, cable length 2 m
Drain connection:	Ø 1 in / Ø 25/31 mm, cable length 2 m

Tank X-ray Film Processor for NDT

Kowotest - KOWOPRO K series