Alternating current electric field device

Eddyfi - Amigo 2

It has the ability to inspect through thick coatings, reducing the cost of removing and reapplying coatings.

Building upon the proven ACFM technology, the Amigo 2 inherits over 30 years of ACFM performance with superior reliability and ease of use.
Effective through thick paint and coating layers: Reduces the need for surface removal during crack inspection.
High performance & quality data: Fast signal acquisition and high resolution enable the detection of small cracks.
Portable and durable design: IP65 water and dust resistant casing, large touchscreen display, long-lasting hot-swap battery.
Wide compatibility: Supports SENSU, SENSU 2, legacy Amigo, array, and 3BZ technology probes.
Assist software: Plans and reports on structural inspections; easy to use and intuitive.

Inspections of surface- breaking cracks on welds.
Generic structural weld inspections.
Fillet weld, lap joints, and butt weld inspections.
High temperature inspections (up to 500 °C / 932 °F) – high temperature testing.
Thread inspection – checking bolt threads.
Underwater inspections down to 50 m .
Galvanized steel weld inspection – inspection of galvanized steel welds.

Specification
Dimensions (W × H × D)	355 × 288 × 127 mm (14.0 × 11.3 × 5.0 in)
Instrument weight	6.6 kg (14.5 lb)
Volume	13 L (791 in³)
Power requirements	100–240 VAC 50–60 Hz
Power supply	Direct VAC or onboard batteries
Batteries Type	Li-ion rechargeable DOT compliant
Typical battery life	6–8 hours
Video output	HDMI
Display size	26.4 cm (10.4 in)
Display features	Multi‑touch. Non‑reflective (AR coating). Anti‑fingerprint (oleophobic coating). 3 mm chemically strengthened glass cover. Optically bonded LCD and touchscreen. Passive backlight enhancement
Connectivity	Gigabit Ethernet. Wi‑Fi™. Bluetooth®. USB 2.0 (×3)
Storage	SSD 100 GB
Cooling	Sealed and fanless
Probe inputs	SENSU. SENSU 2. Amigo
Frequency	5 kHz and 50 kHz
Data resolution	16 bits