Weight pressure calibration system up to 1000 bar
Ametek - T Series
Model Type T is a secondary standard for pressure, providing a wide working range up to 1000 bar and an accuracy of 0.015%...
Gọi (+84) 828 31 08 99 để được tư vấn.
Technical Description
- Pressure range up to 100 000 kPa (15 000 psi)
- 3 highest accuracy levels up to ±0.015% rdg
- Repeatability: ±0.005% rdg
- Unit of measurement: psi, kg/cm2, bar, kPa
- Flexible configuration for various applications
- 1 column used at construction site
- 2 columns for laboratory use
- Standard acceleration 9.80665 m/s2
- Using dual volume pump
- Weight set with small pressure increase
- Easy to change levels
Specifications
| Overview | |
| Type: | Hydraulic, piston gauge |
| Pressure range: | to 100,000kPa/15,000psi |
| (model dependent) | |
| Accuracy (12 months): | to ±0.015%rdg |
| Increments (low-min): | 5 psi, 0.5 kg/cm2, 0.5 bar, 50 kPa |
| Increments (high-min): | 50 psi, 5 kg/cm2, 5 bar, 500 kPa |
| Gravity: | 9.80665 m/s2 (international standard) |
| Local gravity avaiable (specify when ordering) | |
| Piston/cylinders: | Single or dual |
| Columns: | Single or dual |
| Weight sets: | Single or dual |
| Pressure source: | Lever action, hand-actuated, dual volume hydraulic pump |
| Medium: | Distilled water/alcohol mix (standard) |
| or AAA oil (optional) | |
| Reservoir capacity: | 1,23L/75 in3 |
| Wetted surfaces: | 300 series stainless steel, monel |
| O-ring: | Buna N (standard), EPT (optional), Viton (optional) |
| Test connections: | 1/4" NPT, 1/2"NPT, 7/16" UNF |
| -1/4"BSP and 1/2" BSP | |
| Weight material: | Hard, non-magnectic alloy (imperial units), stainless steel (±0.015% imperial and metric models, |
| aluminum (small incremental weight sets) | |
| Engineering units | psi, kg/cm2, bar, kPa |
