Share your requirements so Quoc Huy can recommend a suitable approach.
It is a simple Vickers hardness tester but has the ability to measure the depth of carburizing and nitriding layers with quite high accuracy.
This is a simple Vickers hardness testing device but has the ability to measure the depth of the carburizing and nitriding layer with quite high accuracy, suitable for use in small factories for testing right at the workshop...
For case depth hardness testing with non-destructive method on all metals: Iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys.
Heat treated, hardened, nitrided, cemented and hardened.
| Overview | |
| Standard | EN ISO 6508 / EN ISO 14577 / ASTM E-18 |
| Displaceable probe travel | 30mm |
| Lifting screw travel | 150mm |
| Test load | Vickers: 98.07 - 147.1 - 294.2 - 490.35 - 980.7 N (10 - 15 - 30 - 50 - 100 kgf) |
| Brinell: 98.07 - 153.2 - 294.2 - 306.5 - 612.9 - 1839 - 2450 - 4900 - 7350 - 9807 N (29403 N on request) | |
| (10 - 15.6 - 30 - 31.2 - 62.5 - 187.5 - 250 - 500 - 750 - 1000 kgf) (3000 kgf on request) | |
| Rockwell: 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf) | |
| Superficial Rockwell: 147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf) | |
| Real testing capabilities | CHD: 525 - 550 - 600 - 650 (Or larger request) |
| Vickers: HV10 - HV15 - HV30 - HV50 - HV100 | |
| Brinell HBWT: HB30 - HB10 - HB5 - HB2.5 MPa (F/D2) | |
| Rockwell: HRA - HRB - HRC - HRD - HRE - HRF - HRG - HRH - HRK | |
| Superficial Rockwell: HRN - HRT | |
| Export data | Bluetooth, RS 232 C or USB on request. |
| Accuracy | Better than 0.5% |
